EU tariff chapter 73
ARTICLES OF IRON OR STEEL. 26 headings and 234 eight-digit codes, with conventional duty rates from free to 3.7 per cent.
Notes
1. In this chapter, the expression ‘cast iron’ applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in note 1(d) to Chapter 72.
2. In this chapter, the word ‘wire’ means hot- or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm.
Headings and duty rates
Heading 7301
Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel:
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| 7301 10 00 | Sheet piling | Free | |
| 7301 20 00 | Angles, shapes and sections | Free |
Heading 7302
Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialised for jointing or fixing rails:
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| 7302 10 | Rails: | ||
| 7302 10 10 | Current-conducting, with parts of non-ferrous metal | Free | |
| Other: | |||
| New: | |||
| Vignole rails: | |||
| 7302 10 22 | Of a weight per metre of 36 kg or more | Free | |
| 7302 10 28 | Of a weight per metre of less than 36 kg | Free | |
| 7302 10 40 | Grooved rails | Free | |
| 7302 10 50 | Other | Free | |
| 7302 10 90 | Used | Free | |
| 7302 30 00 | Switch blades, crossing frogs, point rods and other crossing pieces | 2.7 % | |
| 7302 40 00 | Fish-plates and sole plates | Free | |
| 7302 90 00 | Other | Free |
Heading 7303 00
Tubes, pipes and hollow profiles, of cast iron:
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| 7303 00 10 | Tubes and pipes of a kind used in pressure systems | 3.2 % | |
| 7303 00 90 | Other | 3.2 % |
Heading 7304
Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel:
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| Line pipe of a kind used for oil or gas pipelines: | |||
| 7304 11 00 | Of stainless steel | Free | |
| 7304 19 | Other: | ||
| 7304 19 10 | Of an external diameter not exceeding 168,3 mm | Free | |
| 7304 19 30 | Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm | Free | |
| 7304 19 90 | Of an external diameter exceeding 406,4 mm | Free | |
| Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: | |||
| 7304 22 00 | Drill pipe of stainless steel | Free | |
| 7304 23 00 | Other drill pipe | Free | |
| 7304 24 00 | Other, of stainless steel | Free | |
| 7304 29 | Other: | ||
| 7304 29 10 | Of an external diameter not exceeding 168,3 mm | Free | |
| 7304 29 30 | Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm | Free | |
| 7304 29 90 | Of an external diameter exceeding 406,4 mm | Free | |
| Other, of circular cross-section, of iron or non-alloy steel: | |||
| 7304 31 | Cold-drawn or cold-rolled (cold-reduced): | ||
| 7304 31 20 | Precision tubes | Free | |
| 7304 31 80 | Other | Free | |
| 7304 39 | Other: | ||
| 7304 39 50 | Threaded or threadable tubes (gas pipe) | Free | |
| Other, of an external diameter: | |||
| 7304 39 82 | Not exceeding 168,3 mm | Free | |
| 7304 39 83 | Exceeding 168,3 mm but not exceeding 406,4 mm | Free | |
| 7304 39 88 | Exceeding 406,4 mm | Free | |
| Other, of circular cross-section, of stainless steel: | |||
| 7304 41 00 | Cold-drawn or cold-rolled (cold-reduced) | Free | |
| 7304 49 | Other: | ||
| 7304 49 83 | Of an external diameter not exceeding 168,3 mm | Free | |
| 7304 49 85 | Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm | Free | |
| 7304 49 89 | Of an external diameter exceeding 406,4 mm | Free | |
| Other, of circular cross-section, of other alloy steel: | |||
| 7304 51 | Cold-drawn or cold-rolled (cold-reduced): | ||
| 7304 51 10 | Straight and of uniform wall thickness, of alloy steel containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum | Free | |
| Other: | |||
| 7304 51 81 | Precision tubes | Free | |
| 7304 51 89 | Other | Free | |
| 7304 59 | Other: | ||
| 7304 59 30 | Straight and of uniform wall thickness, of alloy steel containing by weight not less than 0,9 % but not more than 1,15 % of carbon, not less than 0,5 % but not more than 2 % of chromium and, if present, not more than 0,5 % of molybdenum | Free | |
| Other: | |||
| 7304 59 82 | Of an external diameter not exceeding 168,3 mm | Free | |
| 7304 59 83 | Of an external diameter exceeding 168,3 mm but not exceeding 406,4 mm | Free | |
| 7304 59 89 | Of an external diameter exceeding 406,4 mm | Free | |
| 7304 90 00 | Other | Free |
Heading 7305
Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406,4 mm, of iron or steel:
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| Line pipe of a kind used for oil or gas pipelines: | |||
| 7305 11 00 | Longitudinally submerged arc welded | Free | |
| 7305 12 00 | Other, longitudinally welded | Free | |
| 7305 19 00 | Other | Free | |
| 7305 20 00 | Casing of a kind used in drilling for oil or gas | Free | |
| Other, welded: | |||
| 7305 31 00 | Longitudinally welded | Free | |
| 7305 39 00 | Other | Free | |
| 7305 90 00 | Other | Free |
Heading 7306
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel:
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| Line pipe of a kind used for oil or gas pipelines: | |||
| 7306 11 00 | Welded, of stainless steel | Free | |
| 7306 19 00 | Other | Free | |
| Casing and tubing of a kind used in drilling for oil or gas: | |||
| 7306 21 00 | Welded, of stainless steel | Free | |
| 7306 29 00 | Other | Free | |
| 7306 30 | Other, welded, of circular cross-section, of iron or non-alloy steel: | ||
| Precision tubes: | |||
| 7306 30 12 | Cold-drawn or cold-rolled (cold-reduced) | Free | |
| 7306 30 18 | Other | Free | |
| Other: | |||
| Threaded or threadable tubes (gas pipe): | |||
| 7306 30 41 | Plated or coated with zinc | Free | |
| 7306 30 49 | Other | Free | |
| Other, of an external diameter: | |||
| Not exceeding 168,3 mm: | |||
| 7306 30 72 | Plated or coated with zinc | Free | |
| 7306 30 77 | Other | Free | |
| 7306 30 80 | Exceeding 168,3 mm but not exceeding 406,4 mm | Free | |
| 7306 40 | Other, welded, of circular cross-section, of stainless steel: | ||
| 7306 40 20 | Cold-drawn or cold-rolled (cold-reduced) | Free | |
| 7306 40 80 | Other | Free | |
| 7306 50 | Other, welded, of circular cross-section, of other alloy steel: | ||
| Precision tubes: | |||
| 7306 50 21 | Cold-drawn or cold-rolled (cold-reduced) | Free | |
| 7306 50 29 | Other | Free | |
| 7306 50 80 | Other | Free | |
| Other, welded, of non-circular cross-section: | |||
| 7306 61 | Of square or rectangular cross-section: | ||
| 7306 61 10 | Of stainless steel | Free | |
| Other: | |||
| 7306 61 92 | With a wall thickness not exceeding 2 mm | Free | |
| 7306 61 99 | With a wall thickness exceeding 2 mm | Free | |
| 7306 69 | Of other non-circular cross-section: | ||
| 7306 69 10 | Of stainless steel | Free | |
| 7306 69 90 | Other | Free | |
| 7306 90 00 | Other | Free |
Heading 7307
Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel:
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| Cast fittings: | |||
| 7307 11 | Of non-malleable cast iron: | ||
| 7307 11 10 | Of a kind used in pressure systems | 3.7 % | |
| 7307 11 90 | Other | 3.7 % | |
| 7307 19 | Other: | ||
| 7307 19 10 | Of cast iron | 3.7 % | |
| 7307 19 90 | Other | 3.7 % | |
| Other, of stainless steel: | |||
| 7307 21 00 | Flanges | 3.7 % | |
| 7307 22 | Threaded elbows, bends and sleeves: | ||
| 7307 22 10 | Sleeves | Free | |
| 7307 22 90 | Elbows and bends | 3.7 % | |
| 7307 23 | Butt welding fittings: | ||
| 7307 23 10 | Elbows and bends | 3.7 % | |
| 7307 23 90 | Other | 3.7 % | |
| 7307 29 | Other: | ||
| 7307 29 10 | Threaded | 3.7 % | |
| 7307 29 80 | Other | 3.7 % | |
| Other: | |||
| 7307 91 00 | Flanges | 3.7 % | |
| 7307 92 | Threaded elbows, bends and sleeves: | ||
| 7307 92 10 | Sleeves | Free | |
| 7307 92 90 | Elbows and bends | 3.7 % | |
| 7307 93 | Butt welding fittings: | ||
| With greatest external diameter not exceeding 609,6 mm: | |||
| 7307 93 11 | Elbows and bends | 3.7 % | |
| 7307 93 19 | Other | 3.7 % | |
| With greatest external diameter exceeding 609,6 mm: | |||
| 7307 93 91 | Elbows and bends | 3.7 % | |
| 7307 93 99 | Other | 3.7 % | |
| 7307 99 | Other: | ||
| 7307 99 10 | Threaded | 3.7 % | |
| 7307 99 80 | Other | 3.7 % |
Heading 7308
Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel:
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| 7308 10 00 | Bridges and bridge-sections | Free | |
| 7308 20 | Towers and lattice masts: | ||
| 7308 20 10 | Tubular wind turbine steel towers and tower-sections | Free | |
| 7308 20 90 | Other | Free | |
| 7308 30 00 | Doors, windows and their frames and thresholds for doors(112) | Free | p/st |
| 7308 40 00 | Equipment for scaffolding, shuttering, propping or pit-propping | Free | |
| 7308 90 | Other: | ||
| Solely or principally of sheet: | |||
| 7308 90 51 | Panels comprising two walls of profiled (ribbed) sheet with an insulating core | Free | |
| 7308 90 59 | Other | Free | |
| 7308 90 98 | Other | Free |
- (112) A door or window with or without its frame or threshold is considered as one piece.
Heading 7309 00
Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment:
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| 7309 00 10 | For gases (other than compressed or liquefied gas) | 2.2 % | |
| For liquids: | |||
| 7309 00 30 | Lined or heat-insulated | 2.2 % | |
| Other, of a capacity: | |||
| 7309 00 51 | Exceeding 100 000 l | 2.2 % | |
| 7309 00 59 | Not exceeding 100 000 l | 2.2 % | |
| 7309 00 90 | For solids | 2.2 % |
Heading 7310
Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment:
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| 7310 10 00 | Of a capacity of 50 l or more | 2.7 % | |
| Of a capacity of less than 50 l: | |||
| 7310 21 | Cans which are to be closed by soldering or crimping: | ||
| 7310 21 11 | Cans of a kind used for preserving food | 2.7 % | |
| 7310 21 19 | Cans of a kind used for preserving drink | 2.7 % | |
| Other, with a wall thickness of: | |||
| 7310 21 91 | Less than 0,5 mm | 2.7 % | |
| 7310 21 99 | 0,5 mm or more | 2.7 % | |
| 7310 29 | Other: | ||
| 7310 29 10 | With a wall thickness of less than 0,5 mm | 2.7 % | |
| 7310 29 90 | With a wall thickness of 0,5 mm or more | 2.7 % |
Heading 7311 00
Containers for compressed or liquefied gas, of iron or steel:
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| Seamless: | |||
| For a pressure of 165 bar or more, of a capacity of: | |||
| 7311 00 11 | Less than 20 l | 2.7 % | p/st |
| 7311 00 13 | 20 l or more but not more than 50 l | 2.7 % | p/st |
| 7311 00 19 | More than 50 l | 2.7 % | p/st |
| 7311 00 30 | Other | 2.7 % | p/st |
| Other, of a capacity of: | |||
| 7311 00 91 | Less than 1 000 l | 2.7 % | |
| 7311 00 99 | 1 000 l or more | 2.7 % |
Heading 7312
Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated:
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| 7312 10 | Stranded wire, ropes and cables: | ||
| 7312 10 20 | Of stainless steel | Free | |
| Other, with a maximum cross-sectional dimension: | |||
| Not exceeding 3 mm: | |||
| 7312 10 41 | Plated or coated with copper-zinc alloys (brass) | Free | |
| 7312 10 49 | Other | Free | |
| Exceeding 3 mm: | |||
| Stranded wire: | |||
| 7312 10 61 | Not coated | Free | |
| Coated: | |||
| 7312 10 65 | Plated or coated with zinc | Free | |
| 7312 10 69 | Other | Free | |
| Ropes and cables (including locked coil ropes): | |||
| Not coated or only plated or coated with zinc, with a maximum cross-sectional dimension: | |||
| 7312 10 81 | Exceeding 3 mm but not exceeding 12 mm | Free | |
| 7312 10 83 | Exceeding 12 mm but not exceeding 24 mm | Free | |
| 7312 10 85 | Exceeding 24 mm but not exceeding 48 mm | Free | |
| 7312 10 89 | Exceeding 48 mm | Free | |
| 7312 10 98 | Other | Free | |
| 7312 90 00 | Other | Free |
Heading 7313 00 00
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| 7313 00 00 | Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel | Free |
Heading 7314
Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel:
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| Woven cloth: | |||
| 7314 12 00 | Endless bands for machinery, of stainless steel | Free | |
| 7314 14 00 | Other woven cloth, of stainless steel | Free | |
| 7314 19 00 | Other | Free | |
| 7314 20 | Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm² or more: | ||
| 7314 20 10 | Of ribbed wire | Free | |
| 7314 20 90 | Other | Free | |
| Other grill, netting and fencing, welded at the intersection: | |||
| 7314 31 00 | Plated or coated with zinc | Free | |
| 7314 39 00 | Other | Free | |
| Other cloth, grill, netting and fencing: | |||
| 7314 41 00 | Plated or coated with zinc | Free | |
| 7314 42 00 | Coated with plastics | Free | |
| 7314 49 00 | Other | Free | |
| 7314 50 00 | Expanded metal | Free |
Heading 7315
Chain and parts thereof, of iron or steel:
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| Articulated link chain and parts thereof: | |||
| 7315 11 | Roller chain: | ||
| 7315 11 10 | Of a kind used for cycles and motorcycles | 2.7 % | |
| 7315 11 90 | Other | 2.7 % | |
| 7315 12 00 | Other chain | 2.7 % | |
| 7315 19 00 | Parts | 2.7 % | |
| 7315 20 00 | Skid chain | 2.7 % | |
| Other chain: | |||
| 7315 81 00 | Stud-link | 2.7 % | |
| 7315 82 00 | Other, welded link | 2.7 % | |
| 7315 89 00 | Other | 2.7 % | |
| 7315 90 00 | Other parts | 2.7 % |
Heading 7316 00 00
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| 7316 00 00 | Anchors, grapnels and parts thereof, of iron or steel | 2.7 % |
Heading 7317 00
Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper:
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| Made from wire: | |||
| 7317 00 20 | Nails in strips or coils | Free | |
| 7317 00 60 | Other | Free | |
| 7317 00 80 | Other | Free |
Heading 7318
Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel:
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| Threaded articles: | |||
| 7318 11 00 | Coach screws | 3.7 % | |
| 7318 12 | Other wood screws: | ||
| 7318 12 10 | Of stainless steel | 3.7 % | |
| 7318 12 90 | Other | 3.7 % | |
| 7318 13 00 | Screw hooks and screw rings | 3.7 % | |
| 7318 14 | Self-tapping screws: | ||
| 7318 14 10 | Of stainless steel | 3.7 % | |
| Other: | |||
| 7318 14 91 | Spaced-thread screws | 3.7 % | |
| 7318 14 99 | Other | 3.7 % | |
| 7318 15 | Other screws and bolts, whether or not with their nuts or washers: | ||
| 7318 15 20 | For fixing railway track construction material | 3.7 % | |
| Other: | |||
| Without heads: | |||
| 7318 15 35 | Of stainless steel | 3.7 % | |
| Other, with a tensile strength: | |||
| 7318 15 42 | Of less than 800 MPa | 3.7 % | |
| 7318 15 48 | Of 800 MPa or more | 3.7 % | |
| With heads: | |||
| Slotted or cross-recessed heads: | |||
| 7318 15 52 | Of stainless steel | 3.7 % | |
| 7318 15 58 | Other | 3.7 % | |
| Hexagonal-socket heads: | |||
| 7318 15 62 | Of stainless steel | 3.7 % | |
| 7318 15 68 | Other | 3.7 % | |
| Hexagonal heads: | |||
| 7318 15 75 | Of stainless steel | 3.7 % | |
| Other, with a tensile strength: | |||
| 7318 15 82 | Of less than 800 MPa | 3.7 % | |
| 7318 15 88 | Of 800 MPa or more | 3.7 % | |
| 7318 15 95 | Other | 3.7 % | |
| 7318 16 | Nuts: | ||
| Of stainless steel: | |||
| 7318 16 31 | Blind rivet nuts | 3.7 % | |
| 7318 16 39 | Other | 3.7 % | |
| Other: | |||
| 7318 16 40 | Blind rivet nuts | 3.7 % | |
| 7318 16 60 | Self-locking nuts | 3.7 % | |
| Other, with an inside diameter: | |||
| 7318 16 92 | Not exceeding 12 mm | 3.7 % | |
| 7318 16 99 | Exceeding 12 mm | 3.7 % | |
| 7318 19 00 | Other | 3.7 % | |
| Non-threaded articles: | |||
| 7318 21 00 | Spring washers and other lock washers | 3.7 % | |
| 7318 22 00 | Other washers | 3.7 % | |
| 7318 23 00 | Rivets | 3.7 % | |
| 7318 24 00 | Cotters and cotter pins | 3.7 % | |
| 7318 29 00 | Other | 3.7 % |
Heading 7319
Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles, for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included:
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| 7319 40 00 | Safety pins and other pins | 2.7 % | |
| 7319 90 | Other: | ||
| 7319 90 10 | Sewing, darning or embroidery needles | 2.7 % | |
| 7319 90 90 | Other | 2.7 % |
Heading 7320
Springs and leaves for springs, of iron or steel:
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| 7320 10 | Leaf-springs and leaves therefor: | ||
| Hot-worked: | |||
| 7320 10 11 | Laminated springs and leaves therefor | 2.7 % | |
| 7320 10 19 | Other | 2.7 % | |
| 7320 10 90 | Other | 2.7 % | |
| 7320 20 | Helical springs: | ||
| 7320 20 20 | Hot-worked | 2.7 % | |
| Other: | |||
| 7320 20 81 | Coil compression springs | 2.7 % | |
| 7320 20 85 | Coil tension springs | 2.7 % | |
| 7320 20 89 | Other | 2.7 % | |
| 7320 90 | Other: | ||
| 7320 90 10 | Flat spiral springs | 2.7 % | |
| 7320 90 30 | Discs springs | 2.7 % | |
| 7320 90 90 | Other | 2.7 % |
Heading 7321
Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel:
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| Cooking appliances and plate warmers: | |||
| 7321 11 | For gas fuel or for both gas and other fuels: | ||
| 7321 11 10 | With oven, including separate ovens | 2.7 % | p/st |
| 7321 11 90 | Other | 2.7 % | p/st |
| 7321 12 00 | For liquid fuel | 2.7 % | p/st |
| 7321 19 00 | Other, including appliances for solid fuel | 2.7 % | p/st |
| Other appliances: | |||
| 7321 81 00 | For gas fuel or for both gas and other fuels | 2.7 % | p/st |
| 7321 82 00 | For liquid fuel | 2.7 % | p/st |
| 7321 89 00 | Other, including appliances for solid fuel | 2.7 % | p/st |
| 7321 90 00 | Parts | 2.7 % |
Heading 7322
Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot-air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel:
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| Radiators and parts thereof: | |||
| 7322 11 00 | Of cast iron | 3.2 % | |
| 7322 19 00 | Other | 3.2 % | |
| 7322 90 00 | Other | 3.2 % |
Heading 7323
Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel:
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| 7323 10 00 | Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like | 3.2 % | |
| Other: | |||
| 7323 91 00 | Of cast iron, not enamelled | 3.2 % | |
| 7323 92 00 | Of cast iron, enamelled | 3.2 % | |
| 7323 93 00 | Of stainless steel | 3.2 % | |
| 7323 94 00 | Of iron (other than cast iron) or steel, enamelled | 3.2 % | |
| 7323 99 00 | Other | 3.2 % |
Heading 7324
Sanitary ware and parts thereof, of iron or steel:
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| 7324 10 00 | Sinks and washbasins, of stainless steel | 2.7 % | |
| Baths: | |||
| 7324 21 00 | Of cast iron, whether or not enamelled | 3.2 % | p/st |
| 7324 29 00 | Other | 3.2 % | p/st |
| 7324 90 00 | Other, including parts | 3.2 % |
Heading 7325
Other cast articles of iron or steel:
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| 7325 10 00 | Of non-malleable cast iron | 1.7 % | |
| Other: | |||
| 7325 91 00 | Grinding balls and similar articles for mills | 2.7 % | |
| 7325 99 | Other: | ||
| 7325 99 10 | Of cast iron | 2.7 % | |
| 7325 99 90 | Other | 2.7 % |
Heading 7326
Other articles of iron or steel:
| CN code | Description | Conventional duty | Supplementary unit |
|---|---|---|---|
| Forged or stamped, but not further worked: | |||
| 7326 11 00 | Grinding balls and similar articles for mills | 2.7 % | |
| 7326 19 | Other: | ||
| 7326 19 10 | Open-die forged | 2.7 % | |
| 7326 19 90 | Other | 2.7 % | |
| 7326 20 00 | Articles of iron or steel wire | 2.7 % | |
| 7326 90 | Other: | ||
| 7326 90 30 | Ladders and steps | 2.7 % | |
| 7326 90 40 | Pallets and similar platforms for handling goods | 2.7 % | |
| 7326 90 50 | Reels for cables, piping and the like | 2.7 % | |
| 7326 90 60 | Non-mechanical ventilators, guttering, hooks and like articles used in the building industry | 2.7 % | |
| Other articles of iron or steel: | |||
| 7326 90 92 | Open-die forged | 2.7 % | |
| 7326 90 94 | Closed-die forged | 2.7 % | |
| 7326 90 96 | Sintered | 2.7 % | |
| 7326 90 98 | Other | 2.7 % |
Search this chapter
Athren does this from the documents
Athren reads the shipment email with the invoice, the packing list and the transport document, proposes a code for every clear invoice line and asks one question where the invoice is not enough. Your declarant checks what is open and files the declaration. Athren files nothing.
Send us 20 past cases.
For customs brokers in Germany and the Netherlands. We prepare each one, you judge the result.
Pick a time below for a thirty-minute call, or write to us.
Loading the calendar… Book on cal.com